iPhone 6 Plus: a complete analysis from techgenxt sponsered ifixit (7 out of 10 on a scale to be repaired)

iPhone 6 Plus: a complete analysis from techgenxt (7 out of 10 on a scale to be repaired)

Just a few days ago, the new iPhone has been submitted to the corporation of Apple, but the team has already iFixit disassembled an older model, iPhone 6 Plus, by cogs, in the literal sense of the word. Looking ahead, it is worth saying that the iPhone 6 Plus on a scale of maintainability was 7, which is a significant improvement over the iPhone 5S. Well, to continue - more than a dozen photos and a description of each stage of disassembly.



Step 1 . Features iPhone 6 Plus

• CPU: 64-bit processor A8;
• RAM: 1 GB
• Memory: 16.64 and 128 GB;
• Display: 5.5 inch, 1920x1080 pixels (401 ppi) Retina HD;
• Camera: iSight to 8MP;
• Sensors and transducers: fingerprints, barometer, gyroscope, accelerometer, ambient light sensor;
• Size: 158.1 mm in length, 77.8 mm in width and 7.1 mm thickness of the device.

Camera is slightly protrudes from the housing. Actually body is plastic injection, the antenna device can receive the signal. Step 2 . Branch display, chassis intrusion Lift the pentalobe-screws Branch display using cunning tool iSclack inner housing Flex coming from the screen securely fastened using metal brackets Step 3 . Corpus dismantled Step 4 . Remove the module Home button Step 5 . remove the front camera The camera is part of the module, with the inclusion of an external speaker. Step 6: Branch of a metal plate Apple Inc. has changed the same way to connect the Home button to the motherboard. This, according to the team razobrschikov, improves maintainability device. Step 7 . Removing the Battery In older models the battery is higher capacity than the iPhone 6: 11.1 W • h, 2915 mAh. As a result, the battery life iPhone PLus more than the iPhone 6. Step 8 . vibrator module Step 9 . Remove the rear camera (DNL432 70566F MKLAB) Step 10 . Separating the motherboard from the case, plus the support structure of the board Step 11 . Motherboard Step 12 . Remove the speaker Step 13 . connection module charger, headphones and antennas Step 14 . Again antenna Step 15 . Several loops: for the power button and volume buttons Step 16 . Rubber pads to protect from moisture Step 17 . Closing disassembly According to the team iFixit, the new smartphone of Apple fairly easy to repair, plus it's better protected from external influences. Ideally, the display is separated in the first place, because the problem with the display - the most common.